Ford Fiesta

  • Sale
  • £317.75


AIRTEC Stage 2 Fiesta 1.0 Eco Boost front mount Intercooler Upgrade Features:

  • 1 x Twin pass huge 60mm core Intercooler with flowed cast end tanks, this means less welding and a stronger Intercooler
  • Comes with full fitting instructions & pipe work
  • No cutting bumper with our intercooler kit
  • Unbeatable value for money
  • Available in Satin Black or Natural Silver
  • Airtec 3 year unlimited mileage warranty

AIRTEC’s Stage 2 intercooler for the 100ps & 125ps, 140ps 1.0 Eco Boost has proved to be a great upgrade on standard or re-mapped cars. The proven horizontal 60mm core, runs left to right of the end tanks, the twin pass design intercooler is the shortest route for the charged air to pass though, with such a small turbo, the faster the charged air can get in & out the better.

AIRTEC Fiesta MK7 (PRE FACELIFT/FACELIFT) 1.6 Diesel front mount Intercooler upgrade Features:

  • 1 x single pass 50mm core Intercooler with flowed end tanks, this means less welding and a stronger Intercooler
  • Comes with full fitting instructions & pipe work
  • No cutting bumper with our intercooler kit
  • Un-Beatable value for money
  • Available in Satin Black or Silver
  • Airtec 3 year unlimited mileage warranty
  • Fitting will take 1-2 hours depending on mechanical skill
  • May need to cut front grill

Proven vertical 50mm core, runs top to bottom of the end tanks this gives the single pass design intercooler the shortest route for the charged air to pass though, with such a small turbo, the faster the charged air can get in & out the better.

Another great must have with our design is making full use of the hottest part of the intercooler, which is the top section, this is on full show allowing maximum Airflow. Tip, more of the grill can be opened up with Dremel or Drill to allow even more Airflow to the intercooler, we suggest to do this whilst fitting.

 

Focus RS Mk2 Special Edition Stg2 Intercooler & 2.5inch Boost pipe upgrade Front mount Intercooler Features:

  • Air-Ram Scoop, forces Air directly into core of intercooler
  • Huge high flow 60mm core, lower ACT Temps,
  • Smooth flow end tanks, no welds, means no leaks
  • Airtec logo brackets
  • Increased BHP & torque Figure
  • Pro-Series Black
  • Strongest Intercooler available, backed up by our 3 year warranty.
  • Europes No.1 Intercooler for the Mk2 RS

2.5″ Hard pipe upgrade removes fords 2.0″ restrictive boost pipes. We saw gains of 11.8 bhp & 9 lb/ft torque increase’s over the standard ford pipes, these gains were achieved by simply bolting on the big AS 2.5″ Boost pipe kit!

AIRTEC Stage 1 Fiesta ST180 Eco Boost front mount Intercooler Upgrade Features:

  • 1 x Huge 70mm core Intercooler with flowed cast end tanks, this means less welding and a stronger Intercooler (Ford Intercooler 50mm core)
  • Come with full fitting instructions
  • No cutting or drilling with this kit
  • Logo’s have been put onto flowed cast end tanks
  • Un-Beatable value for money
  • Proven Power Increase’s for Fast Road & Track
  • Available in Satin Black or Silver
  • Airtec 3 year unlimited mileage warranty
  • Fitting will take 1-2 hours depending on mechanical skill
  • Proven to handle 250bhp

AIRTEC’s intercooler for the ST180 has proved to be a great upgrade on re-mapped cars, the 70mm thick core has been rolling road tested to bring down the intake temps from 152 degree’s to a very low 39 degree’s, ‘That’s a 102 degree reduction in intake temperature’ If the Ecu see’s over 50 degree’s it will back power off for engine safety, The Airtec intercooler keeps the temps low enough so you keep all your power.

ST180 Eco Boost Stage 3 - Airtec has now taken the Intercooler on the ST180 to a whole new level, with the step core design offering a 85mm thick lower section and a 40mm thick upper section ‘The Double Decker’ the intercooler has been design for cars running hybrid turbo’s and big turbo conversions where fitted.

Fiesta Mk6 & ST150 Airtec Huge 70mm core Intercooler Details:

AIRTEC’s new 70mm Intercooelr for the Mk6 Fiesta is a real winner, finally after 2 designs the intercooler is now awesome! really the only words to describe how well it works.

Please note. Due to the Intercooler being 70mm thick it will mean reworking (cutting) of the lower radiator cradle and trimming of the grill each side behind the bumper, it does retain all the centre grill clips for a factory look once refitted

PLEASE NOTE:
Please specify which options you would like at notes in the checkout:
    Finished In Pro-Series Satin Black OR Natural Silver Finish.
    Airtec Logo Options: No Logo, White Logo, Black Logo OR Custom Colour Logo (Specify in Checkout.)